Purchase 16mm SWA Cable in HDC

swa cable

 

swa cable

Product Feature

Voltage: 0.6/1KV, 1.8/3KV, 3.6/6KV, 6/10KV, 8.7/10KV, 10KV, 11KV, 8.7/15KV, 18/30KV,33KV, 26/35KV
Conductor: Aluminum or Copper
Cores: 1, 2, 3, 4, 5, 3+1, 4+1, 3+2
Armoured: steel wire armour
Insulation: XLPE, PVC, LSF, Fire Resistant
Size: 10mm2
Standard: IEC 60502, BS 7870, GB/T12706 or other.
Packaging: Iron Or Wooden Drum
Application: Building, Engineered, Railway, Plant construction, School, Hospital, Underground and so on.
We can customize according to your requirements.

Insulation of 16mm swa cable aging and metamorphism

The 16mm swa cable is subject to physical phenomena. Such as electrical heating, which can lead to damage to insulation materials. The dielectric insulation level drops, that is, the insulation gets dampened. The middle or middle end of the joint of the 16mm2 swa cable will suffer moisture due to poor sealing. On the other hand, if the seal is not too good at the time of manufacture, the swa 16mm will be damp. If you have any queation about 16mm swa cable, please contact Huadong.

swa-cable

Excessive heating and breakdown of 16mm swa cable

There are many reasons for the heating of the 16mm2 swa cable. The intrinsic reason lies in the free air flow inside, which ultimately carbonizes the insulating material. The external reason is that swa 16mm installed in a cable concentration area in a tunnel, excessive load will accelerate cable in a pipe and cable in an electronic pipe. Atmospheric over voltage or internal over voltage causes breakdown of 16mm2 swa cable insulation due to stress in excess of allowable value. Furthermore, through the analysis of the faults, we find that over voltage in the atmosphere cause many outdoor terminal head failures. If you want to know the 16mm swa cable price, please contact us.

swa cable 9

Mechanical damage and corrosion of protective layer of 16mm swa cable

External force will cause damage, that is, mechanical damage. The vibration of the vehicle will cause mechanical damage of the 16mm swa cable. Eventually the cable is deformed and distorted. The distorted cable is bent too much, thus damaging the cable interior, resulting in an air gap. A chemical reaction or an electrical reaction can corrode the lead part of the swa 16mm. Because of their corrosive differences, red yellow orange and light yellow compounds or fine holes like sponges will cover the lead sheathing. Do you want to buy discounted 16mm swa cable? Please contact us.

swa cable 10

The manufacturing process of intermediate head and terminal of 16mm swa cable

In stripping semiconductors, you will find impurities such as particulate dust in damaged internal insulation or insulating surfaces. Poor sealing of the head of the 16mm2 swa cable, there is moisture inside the insulation, and then resulting in moisture insulation. The swa 16mm joint seal and sealing is not very standard, it will result in grounding. Humidity problem in the manufacturing environment, which the whole insulation of the manufacturing site will damp.

laying cable

Huadong: Huadong Cable Group manufacture quality and cheap 16mm swa cable all the time. So if you need it, please don’t hesitate to send an e-mail us!

240mm cable package

240mm cable storage

huadong factory

huadong factory

Customer Case: Our power cable products have been exported to more than 30 countries, such as: Russian, America, Yemen, South America, North America, Middle East, Africa, Asia, Oceania countries, etc.

huadong custumer

huadong costumer

Leave Your Message

Your Name

* Your Email

Your Phone Number

Your Country

* Your Requirement